stripping pottery barn furniture

  • April 15, 2023

Stripping Pottery Barn Furniture – A Complete Guide

If you have Pottery Barn furniture pieces that have lost their charm, it doesn’t necessarily mean that it’s time to replace them. With the right tools and techniques, you can remove the old finish and give them a new life. Stripping the furniture may take some elbow grease, but the results can be worth it.

In this article, we will guide you through the process of stripping Pottery Barn furniture, including the tools and materials that you will need. We will also address frequently asked questions about furniture stripping and refinishing.

Tools and materials you will need:

– Chemical stripper
– Safety goggles and gloves
– Paintbrush
– Scraper
– Coarse sandpaper
– Fine sandpaper
– Clean rag
– Wood stain
– Polyurethane finish (optional)

Step-by-step guide:

1. Choose a well-ventilated area – Stripping furniture involves harsh chemicals and fumes that can be dangerous. Always work in a well-ventilated area, either outside or in a well-ventilated room.

2. Protect the surrounding area – Cover the floor area and any nearby furniture with drop cloths to avoid any splashes or spills.

3. Put on safety gear – Before starting the stripping process, put on safety goggles and gloves to protect your skin and eyes.

4. Apply the chemical stripper – Using a paintbrush, apply the chemical stripper generously over the surface that you want to strip. Make sure that you cover all areas evenly.

5. Wait and watch – Allow the stripper to sit for the time recommended by the manufacturer. Keep an eye on the furniture and check periodically to see if the finish is starting to loosen.

See also  custom furniture washington dc

6. Scrape off the old finish – Using a scraper, start to remove the old finish by gently scraping away the layers. Work in the direction of the wood grain to avoid damaging the wood.

7. Sand the stripped surface – After removing the old finish, sand the surface completely, using coarse sandpaper at first, and then fine sandpaper. This will help to smooth out any scratches or marks created by the scraper.

8. Clean the surface – Use a clean rag to wipe away any excess dust and debris from the surface.

9. Apply wood stain – Apply wood stain to the surface using a paintbrush. This is optional but can add color back into the furniture. Allow the stain to dry completely.

10. Apply a polyurethane finish (optional) – If you want extra protection for your furniture, you can apply a polyurethane finish. Apply it evenly to the surface using a paintbrush and allow it to dry completely.


Q: Can I strip any Pottery Barn furniture?

A: Most Pottery Barn furniture is made out of solid wood, which can be stripped. However, be cautious when you try to strip furniture made of veneer or plywood, as they are more susceptible to damage.

Q: How do I know if my furniture needs to be stripped?

A: If the finish on your Pottery Barn furniture is starting to crack, chip, or peel, it’s a sign that it needs to be stripped. Additionally, if the furniture has started to look dull and unattractive, stripping could help restore its beauty.

See also  best direct to consumer furniture brands

Q: Can I strip furniture with a varnish finish?

A: Yes, varnish finishes can be stripped. However, it may take longer to strip a varnish finish than paint or stain.

Q: Can I use sandpaper to strip the furniture?

A: Sandpaper can be used to remove the finish from furniture, but it may not be as effective as using a chemical stripper. Additionally, sandpaper can leave scratches on the surface of the wood, so it’s essential to use it cautiously.

In conclusion, stripping Pottery Barn furniture can be a fantastic way to give it a second life. It’s important to take the necessary safety precautions and invest in the right tools and materials. With patience and the proper technique, you can successfully strip your Pottery Barn furniture and enjoy it for years to come.